CGN3 WiFi change

1. Connect all rogers cable and power cord to your modem.
2. If the 2 arrow sign is blinking with green light, the cable has the signal from Rogers.
3. Waiting for 2 arrow sign changes to blue light, it means your modem is working.
4. The wifi name start from CGN OR SSID name at your back of Modem.
5. The password is S/N number at your back of Modem.
6.If the wifi doesn't working, yuo can reset the Modem(you can find reset hole at back of modem,use pin hold 20 seconds.)
7.Still doesn't work, you can power off 1-2 min. and power on the modem.

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

SMARTrg 505n Bridgemode

> 1.  Open a web browser and go to the address http://192.168.1.1/admin.> 2.  Enter the...